senseFly’s intuitive eMotion software makes it easy to plan and simulate your mapping mission.
Plan: Import your preferred base map and define the area you want to cover. Then specify your required ground resolution (with a GSD of down to 1.5 cm), and image overlap.
eMotion automatically generates a full flight plan, calculating the eBee RTK’s required altitude and displaying its projected trajectory.
Configure: If you know your base station’s coordinates, enter these into eMotion. If not, eMotion will calculate your base’s approximate position. Or you can configure eMotion to receive VRS/NTRIP corrections. eMotion then streams correction data to the eBee RTK via the senseFly USB ground modem.
Simulate: To ensure your mission’s success, run a virtual flight that simulates wind strength and direction. Then make any flight plan updates required and prepare to launch.
Launch: To launch the eBee RTK, shake it three times to start its motor, then throw it into the air. The artificial intelligence built into the senseFly autopilot continuously analyzes data from the Inertial Measurement Unit and the onboard GPS to control every aspect of its flight.
Monitor: Using eMotion ground station software you can view the eBee RTK's flight parameters, battery level and image acquisition progress in real time.
Control: Made a mistake with your planning? You can reprogram your drone’s flight plan and landing point during its flight.
Process: Use Postflight Terra 3D professional photogrammetry software, supplied with every eBee RTK, to process your flight’s photos into geo-referenced 2D orthomosaics, 3D point clouds, triangle models and Digital Elevation Models (DEMs), in just a few clicks.
Trust: With the eBee RTK’s GSD of down to 1.5 cm, relative orthomosaic/3D model accuracy of 1-3x GSD, and absolute horizontal/vertical accuracy of down to 3/5 cm (without GCPs), you can have full confidence in the accuracy of the outputs you produce.